· cp /kernel/drv/www.doorway.ru /etc/driver/drv/www.doorway.ru fp_offline_ticker = 10; (The default value is ) echo "fp_offline_ticker/U"|mdb -k. Note: Do not lose semicolons; otherwise, the parameter does not work. If this parameter is set to 10s, the zero-down time is still about 10s. Therefore, you can set this parameter to a smaller value. Copy the /kernel/drv/www.doorway.ru file to the /etc/driver/drv/www.doorway.ru file. Select one of the following to enable or disable specific FC HBA ports: Add the following line for each FC HBA port that is to be enabled in the /etc/driver/drv/www.doorway.ru: name="fp" parent="parent name" . · Run /etc/emcp_cleanup to clean up PP configuration files. Edit /kernel/drv/www.doorway.ru to remove all extra entries of "mpxio-disable=yes", leaving just one. Install PP .
cp /kernel/drv/www.doorway.ru /etc/driver/drv/www.doorway.ru fp_offline_ticker = 10; (The default value is ) echo "fp_offline_ticker/U"|mdb -k. Note: Do not lose semicolons; otherwise, the parameter does not work. If this parameter is set to 10s, the zero-down time is still about 10s. Therefore, you can set this parameter to a smaller value. The location of the configuration files is /etc/driver/drv/. The 4 configuration files. Copy the /kernel/drv/www.doorway.ru file to the /etc/driver/drv/www.doorway.ru file. Enable manual configuration by making sure that the following line in the/etc/driver/drv/www.doorway.ru file is uncommented. manual_configuration_only=1; For more information about this setting, see cfgadm_fp(1M) and fp(7d). Reboot the system.
26 окт. г. /etc/driver/drv/www.doorway.ru: The “Fibre Channel Port driver configuration” file. Purpose: Used to configure MPxIO to work with FC (Fibre. Edit file /kernel/drv/www.doorway.ru; Add the following line for each FC HBA port that is to be During the reboot, the /etc/vfstab file and your dump device. Uninstalling the Drivers for Solaris /kernel/drv/www.doorway.ru file. Edit the “/etc/hosts” file (a symlink to /etc/inet/hosts) and add the IP address.
0コメント